Consulting Hotline0755-2728-6106
Phone number13312911695
Consulting Hotline0755-2728-6106
Phone number13312911695
Your present position：Home > Product > Glue filling machine > Hard light bar filling machine
Hard light bar filling machineCategory：Hard light bar filling machine
Hotline:0755-2728-6106
| Application: Hard light bar, wall washer, King light and other lines of irrigation lamps
| Principle of operation：
1, the program editor: in-kind editing, and then Chen can be
2, will have been edited program storage, similar products can be transferred out.
3, irrigation head movement, the pump body (stepper motor drive) for the plastic
4, the movement trajectory: straight line. Curve. Point. Box. Round. W type, S type. Can take any irregular trajectory
| Parameters:
|
1 |
Proportion with glue |
10: 1~1:1 adjustable between 1 and any fixed proportion |
|
2 |
Mixing method |
Dynamic mixing |
|
3 |
Machine travel |
1200*680*30MM, itinerary can be customized according to the actual needs of the customer |
|
4 |
Counter tops |
Can be placed 40 car lights in 70mm at the same time |
|
5 |
Programming mode |
Teaching programming |
| 6 |
Dimensions |
1650*1220*1450MM |
|
7 |
The main pump (A pump) |
12cc/turn Screw pump（China- German joint venture） |
|
8 |
Attached pump (B pump) |
2.4cc/turn |
|
9 |
Glue power |
Bujin motor |
|
10 |
Tank Capacity |
A Cylinder |
|
11 |
A plastic flow |
2-8g/s |
|
12 |
A plastic head |
Standard single head，Number of head according to the product |
|
13 |
Input pressure |
0.5-0.7Mpa |
|
14 |
Machine power |
1000W |
|
15 |
Supply voltage |
AC220V±10%,50-60HZ |
| Device Configuration:
|
1 |
Control System |
Japanese original Panasonic PLC +2.2 inch Kunlun on-state touch screen |
|
2 |
Software system |
Zhonghu R&D independently, a domestic counterparts developed a software anti-misuse function, anti-fade automatic shutdown function |
|
3 |
Bujin motor |
Japanese YAKO Original motor |
|
4 |
Metering pump body |
Taiwan precision adjustment wear type |
|
5 |
Cut off the system |
Zhonghu R&D independently |
|
6 |
Mixing device |
Zhonghu R&D independently |
|
7 |
Stirring motor |
OUTAI |
|
8 |
Frame material |
A3*3mm manufacture |
| 9 |
Sliding device |
Taiwan SSGB |
| 10 |
Flow detection |
TILL |
| Features:
|
1 |
Friendly and concise interface |
Foolproof operation program design, simple operation, practical,
ordinary workers can learn all operating methods in 5 minutes |
|
2 |
High-end imported electronic control system |
The main electrical part of the wiring, dust, anti-static, have reached foreign standards |
|
3 |
Glue detection feedback function |
Flow detection equipment control B glue the actual output, the accuracy of ± 0.5%; In the tip of the part of the installation of imported acid and alkali visual flowmeter, you can always see the B glue is not a plastic, The drum part is equipped with low level alarm function, timely remind the glue to add
|
|
4 |
Glue filter four protection |
Filter protection measures to reduce the mechanical pump body failure probability, to prevent impurities in the glue into the glue pipeline |
|
5 |
Large work surface |
Can be placed 1.2 meters car lights at the same time, the machine automatically continuous operation, with more efficient |
|
6 |
Equipment running more smoothly |
The overall frame with ultra-thick solid material, an effective solution to the machine when the high-speed movement of body shake, improve production stability and accuracy |
|
7 |
High precision mechanical pump body |
Precision adjustment wear type |
| 8 |
Automatic mechanical agitation |
AB glue mixing using dynamic, mechanical mixing, to ensure that the real sense of AB glue mixture,Completely put an end to dry glue, dry glue uneven phenomenon. |
|
9 |
High precision operation |
The use of double-layer linear slide and high-precision balance block to ensure the accuracy of operations |
| Characteristics of Three-axis Movement:
1, the operation is
simple and convenient: touch screen display operation; all Chinese
interface, the parameters of the record, display, alarm; for each
product to provide the corresponding fixture, the workers training is
simple, saving training time and training costs;
2, glue control precision: all key components are imported products, to
ensure high speed, precision, while meeting the conditions of automated
production under the high reliability requirements.
| Main features of machine：
1, with plastic, plastic irrigation integration, automatic operation, a machine to achieve two functions.
2, the proportion of setting adjustment, plastic volume adjustable.
Ready to use at any time, with high precision, on-demand ratio, saving
glue.
3, the operation is simple and convenient, the program is simple to
edit, easy to disassemble, directly to the A B two kinds of glue were
placed in two corresponding barrels, when filling with plastic, workers
only need to press the switch can be.
4, according to the performance of the glue, A bucket with a thermostat
device, B plastic bucket sealed to prevent volatile, liquid level sensor
device, when the glue below this level automatically alarm, add the
corresponding glue
5, easy to clean, AB glue only part of the mixing mouth of the mixing
tube, so the cleaning part of the mixing tube only, the other parts do
not have to clean, if the get off work or to stop for some time only
filling the mixing tube to take down, To the cleaning agent or
immediately clean on the line, no supplies
| Technical features of machine:
1, the proportion of any adjustable
glue: not limited to the use of the ratio of 1: 1 of the glue, for this
technical bottleneck we first break.
2, choose any glue supplier: because the machine has a smart matching glue function, not limited to 1: 1 glue.
3, for enterprises to save costs: a machine can replace multiple employees, a year can save the money out of the machine.
4, for enterprises to reduce the burden of management and recruitment.
Reduce the burden on employees, administrators, management can focus
more on the management of production; personnel recruitment staff also
eliminates the "difficult" problem, a lot of hidden costs to reduce.
5, the company has a number of experienced design (10 years of plastic
irrigation design and development experience) for the future maintenance
of the machine, upgrade escort. In the production process can also give
some suggestions.
6, the company product positioning clear. And the market of other
companies with the same type of strategy is different, I Secretary
adhering to
Consulting Hotline0755-2728-6106
Phone number13312911695
Scan, focus on us
