Consulting Hotline0755-2728-6106
Phone number13312911695
Consulting Hotline0755-2728-6106
Phone number13312911695
Your present position：Home > Product > Glue filling machine > Modular filling machine
Modular filling machineCategory：Modular filling machine
Hotline:0755-2728-6106
| Application：Display module, LED drive power, capacitors, mine, the electronics industry product filling
| Principle of operation：
1, the program editor: just enter the product line spacing, the number of rows, the length of each line, the number of rows of the module, the number of rows of light cups can be.
2, the program calls: the editing program will be stored, similar products can be transferred out.
3, filling the way: irrigation head movement, the pump (stepper motor drive) for the plastic
4, the movement trajectory: straight line. Curve. Point. Box. Round. W type, S type. Can take any irregular trajectory.
5, Z axis up and down movement with ball shaft screw rapid response.
6, glue machine automatic ratio
| Filling speed:
1, irrigation head running speed: 0-600mm / s
2, the machine trip: 800 * 800 * 100mm,
3, for the glue speed: 0.5-20 / s (irrigation head speed and glue for the speed of the combination of irrigation speed)
| Parameters:
|
1 |
Proportion with glue |
10: 1~5:1 adjustable between 1 and any fixed proportion |
|
2 |
Mixing method |
Dynamic mixing |
|
3 |
Machine travel |
800*800*100mm |
|
4 |
Counter tops |
1150*1000*30MM（Refined steel plate） |
|
5 |
Programming mode |
Teaching programming |
| 6 |
Applicable Products |
Display module, LED drive power, capacitors, mine, the electronics industry |
|
7 |
Dimensions |
1320*1150*1500MM |
|
8 |
A pump |
Piston pump |
|
9 |
B pump |
Piston pump |
|
10 |
Barrel capacity |
A Cylinder |
|
11 |
A plastic flow |
2-10g/s |
|
12 |
A plastic head |
Standard with a mouth out of a plastic head (and then rooted in the product with plastic mouth) |
|
13 |
Input air pressure |
0.5-0.7Mpa |
|
14 |
Machine power |
1000W |
|
15 |
Supply voltage |
AC220V±10%,50HZ |
| Device Configuration:
|
1 |
Control System |
Xinjie PLC + motion control card +7.2 inch Kunlun on-state touch screen |
|
2 |
Software system |
Zhonghu R&D independently |
|
3 |
Bujin Motor |
Panasonic servo motor |
|
4 |
Metering pump |
Taiwan precision adjustment wear type |
|
5 |
Cut off the system |
Zhonghu R&D independently |
|
6 |
Mixing device |
Zhonghu R&D independently |
|
7 |
Stirring motor |
Taiwan OUTAI |
|
8 |
Frame material |
Steel structure |
| 9 |
Sliding device |
Taiwan HIWIN+Screw |
| 10 |
Mixing tube cleaning |
Gas and liquid cleaning |
| 11 |
Flow detection |
Visual flowmeter |
| Features
|
1 |
Friendly and concise interface |
Foolproof operation program design, simple operation, practical, ordinary workers can learn all operating methods in 5 minutes |
|
2 |
High-end imported electronic control system |
The main electrical part of the wiring, dust, anti-static, have reached foreign standards |
|
3 |
Glue detection feedback function |
Flow detection equipment control B glue output,
|
|
4 |
Glue filter double protection |
Filter protection measures to reduce the mechanical pump body failure probability, to prevent impurities in the glue into the glue pipeline |
|
5 |
Bucket function |
A bucket with a stirrer to prevent precipitation, B plastic bucket tightness to prevent evaporation |
|
6 |
Equipment running more smoothly |
The overall frame with ultra-thick solid material, an effective solution to the machine when the high-speed movement of body shake, improve production stability and accuracy |
|
7 |
High precision mechanical pump body |
Precision adjustment wear type |
| 8 |
Automatic mechanical agitation |
AB glue mixing using dynamic, mechanical mixing, stirring speed 0-3000rpm adjustable
|
|
9 |
Sliding device |
Using Taiwan HIWIN slide and screw |
| Characteristics of Three-axis Movement:
1, the operation is simple and convenient: touch screen display operation; all Chinese interface, the parameters of the record, display, alarm; for each product to provide the corresponding fixture, the workers training is simple, saving training time and training costs;
2, glue control precision: all key components are imported products, to ensure high speed, precision, while meeting the conditions of automated production under the high reliability requirements.
| Main features of machine：
6, applicable to a wide range of industries.
Consulting Hotline0755-2728-6106
Phone number13312911695
Scan, focus on us
